Know About Windshield Repair Technology And Tools

When it comes to differentiate between the windshield repair and replacement jobs, the fact is that the repair costs a fraction of replacements. Some auto service providers purposely suggest the car owners to go for replacements so that they can earn extra money. In fact, a small chip or crack can be easily repaired. This is the reason why it is said to acquire assistance of a professional auto service provider.

Leading auto glass repair experts are known to offer their services based on advanced auto glass repair technology and innovative tools. Individuals can go through this article to know more about such technology and tools that are getting used by the experts nowadays. Please go through the following points.

Glass technology

Modern technology based repair kits are available and the kit comes with a simple switch. The switch is designed to offer consistent repair whenever required. It also comes featured with a built-in rechargeable 12 volt battery and the kit is designed to make up to three repairs simple at the same time. One of the quality aspects is that it supports direct air to air exchange and this method is observed as more functional than the method of pulling the air with the use of resin. The pressure used in the method helps in filling the damaged area in a less time.

PRISM technology

One of the advanced glass technologies is the PRISM technology that stands for Pre Resin Injection Suspension Method. A side resin chamber is utilized by the technology that supports dry vacuum. Dry vacuum is considered as an essential step before resin is put in the break. Another quality aspect of the technology is that it utilizes a stainless steel Prism injector to support strong vacuum needs for the repair task. The injection system offers more quality repair results as compared to different hand-operated tools.

Long crack resin technology

A long crack resin is developed to achieve better results for correcting long cracks or chips in the windshield. In fact, the application of resin can enhance the tensile strength of the car glass but the strength factor depends on the type of glass used. The kind of resin is thin, durable and is very easy to use. It can be used easily to any kind of tough chip or cracks. The technology also offers enough holding power to the glass.

One of the best ways to maintain the value of vehicles is to opt for quality auto glass services for any kind of windshield repair or replacement tasks. By repairing the glass area that actually needs fixing, one can help in maintaining the overall structural integrity of vehicles. The fact is that a sub-standard repair service can cut down the life of the glass to a greater extent.

Auto Repairs Should Be Left to Professionals

When it comes to auto repairs, some people opt to take the cheap way out. In other words, they get assistance from people who aren't certified professionals. This may seem like a good idea, especially when they find someone who will charge them half of what a professional would. Little do they know, taking the cheap route isn't always the best decision.

One reason it's best to go to a professional for auto repairs is that they have all of the proper equipment. When working on a vehicle, it takes more than a wrench and a few screws. There are certain pieces of equipment that are needed for particular issues. In other words, what's needed to replace tires is totally different from what's needed to fix a dent. An amateur most likely doesn't have direct access to all of the different specialized tools that are needed. This could severely compromise the quality of their work.

Now, some may say all the person has to do is go and purchase the parts if they don't have them handy. This is a true statement. However, even with all of the right parts, this doesn't make them professionals all of a sudden. So, they could have the best parts in the world, but that doesn't automatically increase their skill level and ability. Their inexperience and limited knowledge could even cause them to use some of the parts incorrectly. So, it's best to go to someone with the proper equipment as well as the right amount of experience.

Another reason it's best to go to a specialist for auto repairs is that they offer a warranty. This is extremely important because it ensures that the vehicle owner is protected in the unfortunate case that something goes wrong with the repair. No matter how great and skillful a mechanic may be, they might still make mistakes. So, it's always best to have some type of protection.

On the other hand, an uncertified person usually doesn't offer a warranty. Therefore, if the repair goes wrong prematurely, there's really nothing the owner can do to be compensated for the issue.

Contrary to what some people may believe, auto repairs should be completed by certified professionals. This helps to give the vehicle owner a better chance of getting high quality work done on their automobile. It also gives them an opportunity to be protected if something prematurely goes wrong with the repair. Although it may not be an attractive idea financially, it is the best route to take when all is said and done.

Bloordale Village - Toronto's Up-And-Coming Artsy Neighbourhood

For the urbanite that's wanting to live not far from downtown Toronto, what a neighbourhood has to offer is becoming more important than ever. In addition to house pricing, it's often a lifestyle choice that makes the decision for those planning a move. There is a strong difference found in communities, from their character to physical landscape.

As gentrification moves across the city and touches grungy and worn looking areas, a vibe and excitement possesses these hoods as a new energy and development takes hold.

One such up-and-coming area in west-end Toronto is the Bloordale Village hood which is part of the Dovercourt-Wallace Emerson Junction district. Running along Bloor Street from the Lansdowne subway station to the Dufferin station and tucked along the Junction Triangle, this strip of Bloor is becoming known as a hub for an exciting art scene that is taking shape.

Art studios and galleries are being transformed from once unoccupied industrial and retail buildings, into cool and edgy spaces. The Daniel Faria Gallery is now sleek and contemporary, where once being home to an Auto Body Shop. The gallery represents a small number of select reputable artists and with its out-of- the-way location, becomes an even more hip and exciting find. Another hidden gem is the Scrap Metal Gallery, found in an industrial building on a small dead-end street, accessed through an alleyway to the rear. Rare to Toronto, it's a non-commercial gallery with a private art collection displayed. Bringing international contemporary art to Toronto is Tomorrow Gallery, located in another cool warehouse found off the main beat. The Mercer Union, an artist-run centre that features both national and international artists, moved into this gentrifying hood in back in 2009, from its downtown location. Across the street is found the Toronto Free Gallery, a not-for-profit art space that highlights exhibits which show collaboration between creative groups ranging from visual artists to urban planners. With a Bohemian type allure, these New York "Chelsea" type galleries are adding to this area's artsy mystique.

With a creative draw to the neighbourhood, shabby chic restaurants and shops are opening their doors to the young group of hipsters that are attracted to this edgy hood. Strolling down the street, it's enticing to drop into the ice cream parlour, Lansdowne Cone for unique flavours that are offered. Locals can choose from a number of eateries from Zocalo with a casual menu to Bloordale Pantry's vintage diner. Nothing says hip and urban more than spending a few hours with your friends over a glass of wine and playing board games at the local watering holes Drift and Three Speed. Giving a new meaning to recycling, the new style of d矇cor is incorporating vintage and reclaimed pieces, such as bowling alley wood used as a bar top and pint taps made from an old Electrolux vacuum. The local hipsters moving into the nearby condos, townhouses and houses are looking to compliment their pads with a blend of contemporary and fun furniture. They're also doing their shopping in the hood and finding treasures in such shops as Style Studio and Pimlico Design Gallery for unique one-of-a-kind pieces.

The landscape of Bloordale Village in places is still a little drab, which has kept the housing prices affordable and yet given that edgy vibe that young hipsters love. It's a great opportunity for those looking for a neighbourhood that is on the subway line and minutes from downtown Toronto.

Like many of Toronto's neighbourhoods, Bloordale Village has a yearly street festival called "Big on Bloor Festival", where during the July weekend it becomes a car-free zone with music, live performances, vendors and dance, celebrating the area's art culture and community.

The Bloordale Village vibe is full of energy and creativity drawing like-minded people, wanting to work and live in this hood. As this artsy hood grows, new arrivals to the scene will add to its welcoming transformation.

Using Auto Body Shops to Save Money

Auto body parts are commodities, which have demands occasionally. Regardless of whether you own a car, truck or a motorcycle these requirements will always arise when you want to fix up your vehicle that has had a recent crash or restore a part, which is broken. Most people like to repair their vehicle with good parts. There are ways to find economical and affordable auto parts for your car.

Buy Used Parts

A clever way to save money on car parts or motorcycle parts is to purchase them second-hand. These items can be used or redecorated which permits the person to save funds, yet still get a quality body part. Second-hand parts can be purchased through auto garages or even in some of the auto body shops, which sell old parts. Just make sure that quality of the used part is appreciable, though not bad. Ensure that it will be a fitting addition to the automobile and is in good enough shape to be used in your auto.

Buy Auto Parts in Bulk

If you find that you need multiple auto parts for your car, truck or motorcycle, try to buy them in sufficient numbers. Buying auto parts in bulk will help one to attain the necessary and important parts, which always have demand in the market. From an economical point of view, one might be exempted from heavy priced invoices too. Bulk discounts are often tagged with different auto parts stores. Check out bulk rates and always prefer to get the parts in bulk from an auto body shop at a low-priced rate.

Shop Auto Store Sales

Often auto parts stores will have seasonal sales on the items, which they deal. The items that are widely offered in the auto body shops, are the one of high demand and, hence are naturally expensive.In order to facilitate the potential buyers, various off season sales are carried out by, the prominent spare part manufacturers. You may not be able to find precisely what you have to purchase on sale however this is always an alternative to think and ask about. The parts will be offered at a discounted rate through coupons available in auto body shops. Therefore make inquiries with the manufacturer or look on their website for coupons before heading out to the auto parts store.

Quality of the parts sold by the auto body shop should not be compromised for the budget that one allocates for buying spare parts for his auto. Persisting on using OEM (Original Equipment Manufacturer) parts will make sure that the repair job is completed perfectly, and you start to fly off with a vehicle that is dazzling with new makeover.

A Break Repair Job Is Needed If You Are Hearing Noises

Everyone knows what a hassle it is to be driving a car and all of a sudden you go to make a sudden stop, only to hear that dreaded squealing and screeching sound. You roll down your window, hoping that sound is coming from the vehicle that is next to you. Naturally while you are hoping that sound you heard is not from your own car, the flow of traffic starts to pick up and you are no longer at a standstill. Since traffic is now moving smoothly, you have forgotten about what was giving you a pause for concern. A few days pass by and you haven't paid attention to your vehicle or made any more sudden stops that would make you suspect that something is wrong. The longer you continue to drive and not have your vehicle looked at; you may be causing a bigger problem to arise.

You may not know it, but that high pitched squealing sound you heard a few days ago was the sound of your brakes screaming for your attention. Although you may have been on the lookout for the feel of grinding brakes, you need to also be on the look for any high-pitched noises that may occur when you are coming to a stop. If you experience any changes in the way your vehicle brakes when you make a stop, you need to take your car to a brake repair shop right away.

There is nothing to gain by ignoring your brakes and assuming that you can wait until the last minute to get them fixed. By doing so, you are causing a significant amount of damage to your car, in particularly your brake system. What was once a cheap repair is now going to be a more expensive brake repair job.

Taking your vehicle to a brake repair shop doesn't have to be a task that you keep putting off. If you keep up with how far you drive your vehicle, you can time when you need to go to a brake repair shop, instead of being forced to go when it is most inconvenient for you.

Keeping your vehicle in excellent condition is the best way you can keep your vehicle working properly. The last thing you want to happen is an accident where you are deemed to be at fault because you had faulty brakes. There is also the big risk you take by driving around in less than pleasing weather conditions where it is imperative that your car and all of its functions are up to par. Don't play Russian roulette with yours or anyone else's lives. You would never be able to forgive yourself, should the worst-case scenario happen. There is also the fact that you would have to pay any other involved parties compensation for any damages your car caused.

Do what is right and the next time you hear a weird sound from your vehicle or it doesn't perform as it is supposed to, take your car in to get it checked and repaired.

Reasons For Tinting Your Car Windows

More and more vehicle owners are having their automobile windows tinted. While this may seem like just an appearance enhancement, there are many practical reasons why many consumers are opting to tint their car windows.

For example, did you know that tinted window film could significantly reduce heat inside a car during the summer months by up to 60 percent? That's because the tinted window film stops 99 percent of the sun's harmful ultraviolet rays from entering the car. So not only is your car protected from excess heat, but it is also protected from the light rays that cause interior damage, such as color fading, cracking and warping on the upholstery, leather or plastic trim.

Would you believe that tinted auto glass film would actually protect you and your passengers if you were in an accident? During an accident, the tint film prevents the glass from shattering and flying through the air. The tint film holds the broken glass in place, keeping the driver and passengers safe from glass-related injuries.

Furthermore, tinted vehicle windows help promote safe driving, reducing the glare from the sun and oncoming headlights. This keeps the driver safer because he or she can keep his or her eyes on the road at all times without having to squint or look away due to bright glares.

Another practical reason for having your car windows tinted is increased privacy. Tinted windows prevent burglars and criminals from seeing inside your vehicle, making it more secure and less likely to be broken into. This is especially beneficial for those who routinely park their car in areas of high criminal activity. The car is less likely to be broken into if the thief can't see anything on the inside.

A reputable automobile glass tinting shop will use the highest quality tinting film for your vehicle, and will also provide you with a warranty for anywhere from five years to ten years. The more experienced the tinting installers are, and the higher quality tint film you purchase, will determine how long the window tinting film lasts. You should never attempt to tint your own windows, especially if you have no experience. Furthermore, the window tints available to consumers are very low quality. The professionals should always be sought out to install car window tinting. This will avoid the bubbling and peeling of the tint film after a short period of time.

When the tinting adhesive does eventually break down and begin to bubble, the professionals will remove it. This process can be excruciating for the average consumer to do on their own, but the pros at the auto glass shop have the know how and experience to get it done within a few hours and have the glass prepped for brand new tinting.

Many states have laws regulating the grade of tinting one is permitted to have. The auto glass tinting shop will be able to provide you with the tinting style you desire within your state's regulations.

The practical reasons to have your car windows tinted far outweigh the option to keep the non-tinted auto glass. You'll be safer and more comfortable, and your car will be more secure.

How Car Mechanics Use Technology

Do you know why it's important to find a good mechanic or a good repair shop to repair your car? The reason: it could save you hundreds of dollars in parts and labor! When we say a "good mechanic" or a "good repair shop", we're referring to mechanics who are equipped with the latest technology. You don't want to entrust your car to a shop with outdated machinery and equipment because it will take longer to arrive at a diagnosis. And the longer a mechanic takes to make a diagnosis, the larger your bill for labor!

Remember that car mechanics charge by the hour.

Car repairs can cover any one or a combination of the following (note that this is not a complete repair list).

• Air conditioning checks
• Air bag checks
• Electrical wiring
• Cables
• Clutch service and repair
• Transmission repair
• Wheel Alignment
• Suspension
• Brakes
• Heating system
• Oil and lubrication
• Battery
• Power windows

Much of the troubleshooting that mechanics use to diagnose a problem is facilitated by car repair technology.

Ever noticed how some lights on your panel come on when something's wrong? In most cases, an experienced mechanic will know immediately what the problem is, but there are instances where it will take sophisticated technology to lead to an accurate diagnosis.

Sophisticated technology comes in many forms and one popular one is troubleshooting software. Companies like Auto Tech have a software program that car owners can use to find out what is ailing their vehicle.

Most car owners who were cynical about software programs before should seriously consider purchasing a reliable car troubleshooting software program. For instance, some programs start out by asking you to input your car make and model number, the year of the car and what kinds of equipment it has. The software features a large database of information about all cars in the market and a car owner simply follows the steps when prompted. It employs what the industry calls a "tree diagnosis" where logical steps take you through the entire diagnosis process.

After you've keyed in your car's profile, you use the drop down menu to choose the symptoms that your car is exhibiting. For instance, if you choose "squealing brakes", the program mimics the squealing of brakes and if that's the sound you hear, you confirm it and the program recommends a series of steps.

You may not really want to use a troubleshooting software, but imagine how much time and money you could save if you spoke to the mechanic intelligently, letting him know that you're in the know.

Students who are studying towards certification buy certain tools of the trade. A couple of examples are Snap On and Mac Tools. These two are the most popular in the United States and Canada.

Mechanics now have a wide range of technology tools to help them understand car problems better: digital multimeters (electronic measuring), boroscopes (testing heat exchangers), fuel diagnostic testers (testing and balancing fuel injectors) and other such new technologies.

New car mechanic technologies help shorten the learning curve and speed up diagnosis so that the car owner isn't saddled with too many labor hours.

Take the Scare Out of Auto Repair

How many times have you gone on a long trip and were not quite comfortable with the condition of your vehicle, but you went anyway? Or how many times have you stayed up late worrying about your college student who loves to do "road-trips" with their friends? Have you ever had a spouse that commuted to school in the evenings, or maybe your job takes you over thirty minutes away from home? These are the many questions that most Americans encounter on a weekly basis.

When it comes to auto repair or maintenance to your vehicle it can be not only frustrating, but also time consuming. No one wants to get ripped off or taken advantage of, so making sure you get quality help is vital. Whether you are looking for imported or domestic parts, auto repair can be made easy with simple access to the internet and a few sensible tips.

With the use of the internet daunting topics such as car maintenance can be explained to even the uninformed novice. Normally electrical systems, computerized parts, or exhaust systems can prove complicated and costly to the consumer, but with the internet you can locate dealers or retailers near you and compare services and prices. When dealing with your mechanic and your car expenses be sure to inform yourself on price comparisons, news and reports, performance data, and reputable businesses in your area before give approval on your repairs.

If you are really ambitious you can even access tons of software specifically for auto repair. Many software systems provide an auto repair program designed to be easy in use and extremely powerful, and tailored to your specific vehicle make and model. These programs can help you keep track of your auto repair expenses, remind you of up coming scheduled maintenance and relay any recall information to you. A good beginning to avoid auto repair rip offs is to be prepared. Know how your vehicle works and learn what options and features your vehicle is equipped with. The owner manual is the best place to start, but unfortunately selfdom consulted.

If learning the basics from the comfort of your home is the best choice for you, then hop online and find automotive learning programs on the web. Avoid the sales pitches and over priced repairs. How many times have you run around town only to end up with an a state of frustration because you just needed a simple quote? With many of the online learning programs you can answer your questions about auto repair in a fast and efficient manner, and take out the headaches that tend to plague you in the process. What better way to handle a potential problem in your future?

So whether you are faced with regular maintenance of your vehicle, such as changing those worn-out tires, or a complex electrical repair you can find your solution with the internet. Take the scare out of auto repair, and educate yourself today. You will be glad you did. It is all within your grasp if you are willing to move from where you are today, to where you want to be!

Car Repair - Tip For Finding The Right Shop

At some point it happens to all of us. Your most valuable and needed asset, your car, needs a car repair job.

If you don't have a go to car repair guy on speed dial you may go into a panic. How do you start? Where do you find a trusted mechanic when you're not in a position to shop around? A good place to start is by getting referrals from friends or family members who have a car similar to yours.

With so many makes and models of cars on the market today, it can be hard to find a mechanic that knows American cars as well as foreign made models so it helps to get a referral to a mechanic who you know works on your type of car. Even if you're in a time crunch don't skimp on doing some basic checking. Call the Better Business Bureau or check their web site online and make sure the mechanic shop your interested in, doesn't have a laundry list of complaints against them.

Ask if the car repair shop is accredited. This association can often offer member a discount at certain hotels, or auto repair shops. If you're a member, it never hurts to ask if the shop gives discounts for your membership.

And of course you want to make sure your mechanic is as skilled and up to date on their training as possible so ask if the mechanic is certified by the National Institute of Automotive Service Excellence (ASE).

Before you have any car repair work done ask what their warranty policy is. You should have a warranty on parts as well as a separate warranty on workmanship. A six month warranty is unbeatable, a 90 day warranty is great and a 30 day warranty on workmanship is suspect. Make sure any warranty on parts and workmanship comes in writing so you can bring it back if you have a problem, with no questions asked.

And get any estimates in writing and make sure your mechanic understands if you want to be called if the work will go over that estimated price. If you're on a really tight budget with very little room for wiggle, you need to be upfront with the mechanic and let them know you can't go above the estimate.

Finally check the shops hours and make sure you can get your car back when it's ready for pick up. If you're at work until five o'clock and they close at five, you may be hard pressed to get to your car in time. You should also ask if you can get a loaner while they have your car and check your insurance policy to see if a loaner is covered for car repair.

Changing Oil and Changing Times - The Independent Auto Repair Service Dilemma

If you see fewer auto repair shops in your area then you are witnessing a trend that is spreading throughout the auto repair industry. The small independent auto repair shop is getting squeezed by both the dealers and the 'backyarders' creating shrinking margins and putting many auto repair independents out of business.

The global problem is the auto repair and service market has been shrinking in the last ten or fifteen years. Technology has made cars much more reliable with fewer breakdowns, repairs and scheduled maintenances.

Many manufacturers offer some sort of 100,000 mile warranty meaning that the independent will get little chance to work on that car for the first 5-10 years it is owned.

As new car sales margins have gone down, VW, Chevrolet, Toyota and other manufacturers are looking to their service departments to make up the difference.

Additionally many dealers such as Porsche and Saab have been adding other value added benefits such as a loaner car while repairs are being made. Independents are now being forced to give courtesy rides to customers in an effort to keep up with the dealers since customers now expect this service.

Furthermore dealers such as Mercedes and Ford are now directly offering specials on services making their dealer prices comparable to independent repair shop prices.

But it's not just competitive pricing that is worrying the independents.

The battle for skilled labor is also being won by the dealers: the dealers have always competed for skilled labor and now have become even more aggressive. With fewer young people entering the auto repair profession and opting instead for careers such as health and technology, the total talent pool of the top skilled auto technicians is shrinking.

Increasingly it is becoming harder for independents to hire and retain these highly skilled employees. As an automotive technician, would you rather work for Audi or Joe's Garage?

The dealers are picking up the best 'mechanics' or as they are known today, 'technicians.' A top end dealer technician can make $100,000 a year with benefits while an independent shop owner would have to gross over a $1,000,000 a year to make that and still have to pay for their own benefits and social security.

Because of these economic realities many independent owners are now closing their shops and going to work for GM, Nissan and other dealers.

This puts the independent auto repair shop at a distinct disadvantage when diagnosing and repairing difficult drivability, fuel injection, electronic and computer related problems.

Additionally, if a diagnosis is made and a part needs replacing the dealer will have it in stock, not only verifying the diagnosis but greatly speeding up the repair time and increasing customer satisfaction. Big advantage Cadillac and Mercedes.

But it's not just a skilled employee war. Techs cannot fix cars without information and there has been a long and ongoing dispute between the dealers/manufacturers and independents over technical information access and diagnostic tools.

The manufacturers claim that their technical information is proprietary while the independents claim the information should be available to anyone that owns or fixes that make of car.

If the dealers wanted to they could stop all outside repairs on their vehicles but the problem is there are not enough dealerships to service all geographic areas, especially smaller towns and less populated areas. So the manufacturer/dealer gives out some information but not all, often charging the independent repair shops for this information.

Not only does the independent have to buy some parts from the dealer, but also some of the technical information as well. Big advantage Honda and Dodge.

Some independent owners simply watch their business steadily decline over the years as they go out of business. Younger independent owners are willing to work harder and for less financial reward hoping industry conditions will eventually improve.

In essence the independent auto repair industry has matured and is now in a decline. Some consolidation is going on but much of the repair work has either disappeared or is now being done by the dealers, auto repair chains or one person 'backyard' shops.

The opportunities are there for those that want to work hard but those opportunities are increasingly limited. In a declining market, only those independents that can develop new competitive strategies will survive and thrive.

As with all mature and declining markets there will be new opportunities for those owners that can adapt and make the changes. Those independent auto repair shop owners that don't modernize, strategize and compete will go the way of the Edsel and Model T.

5 Steps to Help Determine If Being a Mechanic Is Right for You

Have you ever thought about becoming a mechanic, but aren't sure if it's right for you? Here are five easy steps you can take to make sure that an exciting career as an automotive mechanic (also known as an Automotive Technician) is right for you.

STEP 1 - Decide what your lifestyle needs will be

Firstly, think about the kind of lifestyle you're looking for. How much money do you need to pay for the kind of expenses you can expect to have? The word "expect" here is very important: since you're looking at a career move, you can't base your decision on your current financial commitments. Instead, look at your future expected needs. Fortunately, most auto mechanics make between $45,000 and $70,000 a year in Toronto, which is above the Canadian average.

STEP 2 - Talk to other mechanics

If you have a friend (or a friend of a friend) who's a mechanic, ask them if you can spend a bit of time with them to learn more about the job. Ask them what a typical day is like for an automotive technician. Ask them about the challenges of the automotive industry. Ask them about the good, the bad, and the ugly - and use that to help you make your decision.

STEP 3 - Find out about jobs in your area

Think about where you want to work. If you don't want to commute, are there a lot of garages in near your home that could be hiring auto mechanics? Pretend you already have an automotive technology diploma, and you're looking for a job. Take a look at the job sites and see if there are any openings in your target area for mechanic jobs. Fortunately, if you live in Toronto, your chances of finding a job are probably better than most areas simply because the greater Toronto area has a very dense population and a large number of garages.

STEP 4 - Spend some time in a garage

The best way to find out if being a mechanic is right for you is to spend a bit of time in a garage. Walk in to your local garage and talk to the manager to find out if they would be OK with you shadowing a mechanic for a day and helping out if you can (free of charge, of course) in exchange for the opportunity to see what it's like being an automotive technician. You wouldn't believe what you'll learn.

STEP 5 - Apply to a diploma program

If you've done steps 1 to 4 and you think that a career as a mechanic is right for you, then apply to an Automotive Service Technician Diploma and start taking some courses to learn the details of the position. As you're trained, you'll quickly find out if you have the aptitude to be a mechanic.

By following these simple steps, you'll quickly find out if a career as an auto mechanic is the right one for you.

Difference Between a Test Only and Test and Repair Smog Check Station

In California, there are as many as five different types of smog check stations. However, there are essentially two differences: ones that can repair your vehicle and others that can only perform the emissions test. Let's start by going over the different types of shops in California.

Test Only Station

Test only stations are licensed by the state of California to perform only tests on vehicles. They are prohibited from performing any repair services. Gross Polluters can be certified at these stations. Potentially high-polluting vehicles also known as gross polluters in the state's smoggiest regions are directed to these shops for their initial inspection, as specified on the Department of Motor Vehicles registration renewal form. In addition to gross polluters, regular vehicles are randomly chosen to have their test at test only shops. An oil change is not considered a repair service so many test only stations will offer oil changes as an extra service.

Test and Repair Station

Test and repair shops are licensed by the state to provide smog tests and repairs to most vehicles. Under current law, test and repair shops are prohibited from certifying repaired gross polluters or vehicles that have been directed to test only stations for inspection. Vehicles that are not gross polluters or selected to perform a test only can be brought to a test and repair station to complete their smog test. The test and repair station can both test and perform maintenance and repairs to your vehicle in order for it to pass the smog check. However, only test only shops and Gold Shield shops are able to certify repaired gross polluters.

Gold Shield Stations

Gold Shield shops are licensed test and repair shops that have received additional certification by Bureau of Automotive Repair (BAR). In addition to the services provided by regular test and repair stations, Gold Shield stations can certify vehicles identified as gross polluters. They can also perform the "after repairs" certification of vehicles directed to test only stations for an initial inspection, as long as the Gold Shield station has performed repairs to the directed vehicle. Gold Shield stations also contract with the Bureau of Automotive Repair to perform state subsidized emissions related repairs on vehicles participating in the Consumer Assistance Program. Gold Shield shops located in the Basic program areas of the state can certify Enhanced area vehicles for new and used car dealers who purchase them and offer them for sale in the Basic and Change of Ownership program areas.

To summarize, test only stations can only perform the smog test and cannot perform any repairs to your vehicle. Test only stations can certify gross polluters. Oil changes and minor services are not considered repair service so these services may be offered at test only shops. Test and repair shops can perform any repair service as well as the state emissions test, but they cannot certify gross polluters. Gold Shield shops can perform repair services and are specially licensed by the state to certify gross polluters as well.

Auto Glass DIY Repair Kit - Advantages

For all the first time car owners out there, this one's for you. If it so happens that you are afraid of DIY auto repair, then you probably want to have a professional handle all your auto and auto glass problems. However, the fact is that some small car problems such as auto glass and mirror repairs can be easily repaired with a do it yourself repair kit that can be bought in any auto parts store. In the long run, it is probably inevitable for you to enter these stores. The car windshield is one of the most common problem areas for many cars. This is because small nicks and cracks can easily appear if you are hit by a small rock or projectile flung accidentally or otherwise. Once can imagine several scenarios where this can occur to you. Perhaps a rotten tree branch suddenly fall on your car, or possibly even a fruit can do some damage.

Auto glass repair kits can save you not only a lot of time, but also a lot of money. And in truth, they are not so difficult to apply to your car. ll you really need is a few spare minutes, some sunshine, and your auto repair kit. Of course, you will have to carefully read the instruction in your auto repair kit. But it all basically foes like this; first, you take out the pump that is included in your kit, prepare everything, clean the surface of your car glass that needs repair with a dry and absorbent rug or perhaps an piece of cotton cloth. Then just put the resin in the pump as instructed and insert it applying the resin gently by squeezing it out little by little. After that, all that is left for you to do is to drive your car outside in the hot sun or just park it out so that the resin will dry quickly in the heat. It takes no more than a few minutes for this process to be completed and there are no hassles at all. Anyone with enough competency can use a DIY repair kit with no problems.

So if you are one of those first time car owners, perhaps you know nothing about cars or perhaps you are a girl and are afraid that the technical stuff about cars are out of your comprehension, just remember that the only thing that stopping you from entering that auto car accessories shop and purchasing the right DIY auto glass repair kit is your self. Just try it, it cost no more than nine or eleven dollars so it is really worth your while. Instead of going to a professional who will probably use a DIY repair kit himself, charge you with extra service fees, and take your car for a whole working day, then why not just opt to fix it yourself and save yourself all the trouble? Just get over your fear or insecurity, get some information from the internet, from friends, or from books and magazines. Sometimes, that will be all you need.

Novus Glass Franchise Review and Franchise Facts

For everyone who is planning to start a small business or own a franchisee, Novus Glass Franchise can a viable opportunity. The good thing about owning a franchise is that you can start the business with a small amount and still continue your present line of work. Novus Glass is a large franchisee brand and is a well-known brand. Therefore, the name alone will attract the customers to your business. Novus also provides marketing and advertising assistance to their franchise holders. There are 800 number National referrals for jobs and expert sales force. The company has a very efficient advertising source to provide consistence business to the franchisee owners.

Background: Novus has remained the leader in development and research for over 35 years. Novus has received the prestigious award as the pioneer in US patents for the repair of windshield in the glass industry. Novus has provided a premium-quality windshield that is fully guaranteed and has the best service in auto glass replacement. It also provides quality service and full support to consumer needs.

Benefits: When you buy a Novus franchise, you become part of the company. The Novus staff will provide you with perfect training. You will get support from technical expert, management, the marketing department, and the research team. Novus is a brand name in the industry. It has many years of experience in the glass industry. They will provide expert guidance to succeed in the business. The Franchisee will receive the brand name of the company, the best credibility to start the business. There are very effective training programs available. The equipments of the Novus Company are premium quality resins and windscreen repair tools. They will be provided to you. The staff will help in marketing and provide with good quality equipment for your office.

Novus Glass Franchise cost details:

Franchise Fee: $10,000

Minimum Cash Required: $10,000

Total Investment Range: $22,800 to $206,800

Net Worth Required: $50,000

Getting the finances from the bank is a very tedious process. Sometimes people who wanted to do small business could not get a loan due to various reasons. Novus has found a simple solution for that. The company itself has a facility to give financial help to the person who wants to buy the franchise of Novus.

Novus has made such arrangement that now you can have the franchise at $6,250 for the brand license or you can have $6,450 for the repair and replace franchise. You will receive the down payment of the loan at the first day of training. The person who is selected for a franchise is eligible for a loan. You can pay the loan in full without any pre-penalty.

Novus staff is there to provide any assistance you need. But you need to move ahead in the business on your own. You have to do the business for yourself, but if you need any help, there is a staff of professionals ready to provide you with guidance. Novus provides you with a training facility, marketing facility, operations details, and advertising. Novus Glass Company has been a pioneer in the industry for many years, and they want their associates and franchises to flourish like they have.

An Overview of the Most Common Auto Parts Failures

Your car's health and longevity are heavily dependent on the maintenance you provide through the years. Fortunately, most types of maintenance are simple and require very little time. For example, you'll need to change the oil every 5,000 miles (or longer, depending on your owner's manual). You'll need to periodically replace the air and fuel filters. You'll also need to check the fluid levels and tire pressure on a regular basis. If you're diligent about doing these things, you can keep your vehicle operating smoothly for many years.

Unfortunately, old age eventually comes regardless of what you do to hold it at bay. Auto parts fail and will need to be replaced. Below, I'll give you a list of the components you can expect to replace down the road.

The Fuel Pump

Your fuel pump is responsible for delivering gasoline to your fuel injection system. If it fails, your car's engine (or specifically, the combustion chambers) will not receive the gas required for the combustion process. If you're driving a domestic vehicle, you can expect to replace the pump at approximately 50,000 miles. If you own a Toyota or Honda, you may never need to replace it.

The bad news is that this component is usually installed within the gas tank. As a result, it takes time to replace. While the pump itself might cost $200, the labor might cost twice as much.

The Transmission

A transmission failure is expensive. While small problems, such as leaks, can be fixed easily and inexpensively if they're identified early, a failure usually means replacing the entire assembly. This is because a lot of transmission shops are unwilling to perform a complete overhaul due to the time involved.

Transmissions that are installed within most late model vehicles can last past 100,000 miles. Keep in mind that is merely a guideline; some will fail much sooner. The cost to replace the assembly can exceed $2,500, including parts and labor.

The Braking System

The more aggressively you drive, the sooner you'll need to have your brakes repaired. Most brake jobs focus solely on the pads. The pads wear down and need to be replaced before they begin grinding against the rotors. When that happens, you'll need to have the rotors machined.

The brake pads on light vehicles should only need to be replaced every 50,000 miles or more. Heavy SUVs, on the other hand, might need to have them replaced at 35,000 miles. The pads usually cost less than $80 and can be installed at home. However, if the rotors need to be machined, you'll need the tools and expertise of a mechanic. Expect to pay up to $500 (and maybe more).

The Battery

Car batteries typically last between three and six years. While their durability depends largely on the brand you purchase, the climate in which you live can also play a role. Warm temperatures, such as the heat you might experience in Arizona, can dramatically shorten a battery's life - often to three years.

Fortunately, batteries are inexpensive (usually less than $100) and can be easily replaced without the help of a mechanic.

There are many other components and systems that suffer wear and tear, and eventually need to be repaired or replaced. For example, your car's engine should operate smoothly for over 100,000 miles, but that will depend on your driving habits and diligence in changing the oil. Your catalytic converter should last over 150,000 miles, but a rich fuel blend in the engine can shorten its life.

Consider your vehicle an investment. You'll need to replace parts as they fail. The key is to stay on top of regular maintenance items (i.e. check fluid levels, change the oil, replace filters, etc.) and have problems fixed quickly. By doing so, you'll prevent small problems from turning into large repair bills.

Routine Maintenance

To drain the oil in your vehicle first remove the oil filler cap under the hood of your car. Place a catch pan under the oil pan of your car, and remove the oil drain plug, allowing the oil to flow into the pan. Then locate your oil filter. The position varies between makes and models but the thread direction is always the same. To remove it twist it to the left!!! LEFT!!! I usually loosen it a half a turn and then replace the oil drain plug, wiping off any excess oil around the drain plug. Then remove the oil filter. Check to make sure that the circular rubber gasket came off with the filter. Putting a new oil filter on with a new gasket with the old one still attached is referred to as "double gasketing" and can lead to some costly repairs, so be very careful! Once you verify the old gasket is removed, install the new oil filter, lubing the new gasket with fresh oil. Turn it until it the gasket squishes against the mating surface and then give it another 1/4 turn. After this just replace your engine oil with the proper quantity and weight, determined by manufacturer by engine size.

Then turn the vehicle on for a few seconds and turn back off. Remove oil dipstick and wipe clean. Reinsert and when you remove again the level on the dipstick will be the engine oil level. All dipsticks are clearly marked as to what is the safe oil operating level.

Perform the necessary maintenance reminder light and you are good to go!! This along with replacing your engine air filter, spark plugs and changing your fluids regularly will go a long way to preserving the life of your vehicle!!! Most conventional motor oils these days, begin to breakdown at around 5000 miles so changing your oil based on that will prevent sludge buildup. If you see and leaks on your engine either take it to a shop, or refer to future articles I will be posting. I will try to cover as many topics as possible, and if you have a problem you have been working through or a topic you would like discussed, feel free to drop me a line!! Also a quick tip, air up your tires to keep your fuel costs down!!! Keeping your tires inflated to the proper pressures, as indicated on the manufacturers tire stamp on the inside of the door, will help maximize your fuel economy, and is an all around smart safety practice!!

Old School Auto Body Repair & Leading

Until the 60's most all metal straightening was accomplished with the use of a pick hammer, a body file and a solder box containing the proper elements and tools. The metal used by auto manufactures before the 80's was of the cold roll variety with a gauge of 14 to 16 and was very malleable, making it rather soft, easy to shape and straighten with the use of the pick hammer and dolly. A sharp body file was then applied to cut the metal to a smooth finish and to bring out the high and low places.

Where the metal may be a little thin or rough to pick, the the body solder (leading) would be applied. This also is where the final finishing will take place with the body file plus more picking to assure a smooth flat surface.

Where soldering is needed the metal must be perfectly clean. All paint must be removed and all rust or other contaminates are removed with the use of a torch for heat and Mauriac acid. (Do not inhale the fumes). An electric drill, air drill or wire brush are also handy to remove contaminants.

The solder must be a 30/70 composition. The 30% tin is needed for tinning the metal and acts as a binding agent so the lead would adhere to the metal surface. Tinning the area where the solder was to be applied was accomplished with the use of a acetylene torch, soldering salts, a stick of solder and a rag.

The area to which the solder is to be added must be perfectly cleaned, solder salts applied then heated hot enough to melt the solder. while keeping the area hot, use a rag to wipe the solder over the entire area to be soldered. Now you are tinned and ready to add more solder to the tinned area as a filler.

When adding the solder, a wooden paddle is used to spread the solder over the surface. The surface of paddle must be dipped occasionally in heated bees wax to stop the solder from sticking to the paddle.

Soldering is only used when the straightening could not be accomplished with the pick, dolly, and file. Now, what do you think, are you ready to give it a try? You can do it, God did not make any dummies, "Its better to try and fail than to never try at all'. I invite your comments or questions. Please, I would love to hear from you. Lem

Auto Repair Service Chicago - 3 Easy Ways To Know Your Oil

If you need auto repair service, Chicago you should start with knowing your oil. When you drive, the heat from your engine breaks down the oil which is used as a lubricant for the moving parts. When this happens, it becomes less effective and several bad things may start happening.

The purpose of this slippery stuff is not only to lubricate your engine, but also to trap dirt and any other potentially destructive floaters which could cause major damage. But like all good things, your oil's ability to protect and serve will come to an end.

Without the protection of clean lubrication, parts of your engine rub together and begin to wear out. This will not only decrease the lifespan of your car, but it will become very, very costly to repair and replace.

Changing your vehicle's oil is one of the most simple and important things you can do if you want to save money on auto repair service, Chicago. And just to put your mind at rest: this is not expensive.

Most manufacturers recommend you change your oil and filter every 3,000 - 5,000 miles. However, it is always a good idea to consult your owner's manual for more detailed information.

Auto Repair Service Chicago Tip #1 - Do Not Over Fill!

Never overfill your vehicle's engine. If you put too much in, the crankshaft can actually come in contact with it. This is bad. Because the crankshaft is turning at several thousand revolutions per minute, it will cause the stuff to froth.

Having this happen is a lot like the situation created if grandmother made her famous spaghetti sauce by stirring the pot at the speed of sound. The walls and ceiling would get quite a treat, but the family would go hungry.

If you are low on oil, you can add any grade you like, though we advise you to use the grade recommended in your owner's manual. If you regularly run low, be sure to mention it to your auto repair service professional.

Running low frequently could be a leak or you may be buring oil. Both of these can be signs of major problems down the road if you don't get it looked at.

At some point, every engine starts to burn oil. It's best to get into the habit of checking the dipstick from time to time, and you just might avoid having your engine melt down one day.

Auto Repair Service Chicago Tip #2 - Change Oil More Frequently If...

• You have jackrabbit starts, heavy acceleration, or high speed driving


• You live where the climate is extremely hot or cold


• You often drive on dirt roads


• Your engine is old and burns oil


• You frequently carry heavy loads

Auto Repair Service Chicago Tip #3 - Checking Your Oil is Simple

1: With your vehicle parked on a level surface, remove the oil dipstick.

2: Clean it off using a paper towel or old rag, and then reinsert it.

3: Remove it again, and check the oil level.

The dipstick shows the oil level; the MIN marking means your at the minimum operating level and is a quart low. Ideally, it should be right at the full mark. If it's at or below the add mark, that means you are a quart low and should add a quart. If it's between the two marks, you can add part of a quart to bring it up to full.

Auto Mechanic School - Keep Your Customers Coming Back

The economy these days has a lot of demands. The medical field, for example, demands more research on the different possible diseases threatening human health. The field of architecture, in the other hand, demands new innovative designs for a more unique approach on housing.

However, the field of mechanical science is not an exception. This field also has a lot of demands that are not yet met. But the main demand by almost each and every one of the customers is repair.

They always need car mechanics and technicians most especially now that vehicles are part of the daily cycle of human business and even their private lives. Vehicles prove to be an important invention that could be utilized by owners to help them get to their desired destinations as quickly as possible.

Now, there are many damages in many different autos that can be as complicated as they can be. Some auto mechanics and technicians do things to repair them but the fix never last long since they really are not sure what the source of the problem is. This is why an auto mechanic school teaches their students the most common and even the rare problems that the common vehicle may encounter.

Picking the right auto mechanic school is crucial since not all schools offer the same quality of education. Definitely, choosing the best auto mechanic school will give you the boost over many other auto mechanics and technicians. With this, learning the best things about auto repairs will boost your confidence that you, as an auto mechanic, will absolutely satisfy your patrons and loyal customers. Being knowledgeable with vehicles is also the way to gain those loyal customers and patrons.

The good thing about being able to study in a good auto mechanic school is that an employer who owns a well-known auto shop can either hire you, or you could also start your own auto shop and make your way to make it big. You should love vehicles in the first place before entering in an auto mechanic school so that you never get tired of what you are doing.

The world surely has a lot of demands and we don't get to meet all of them right away. Jobs are really important and it's almost like a natural instinct for survival, and the job you do will be your source of living for the years to come.

Whether you start your own auto shop or be hired by an employer, your goal in this field is the same, satisfy your customers so they keep on coming back.

Auto Glass and Windshield Replacement Versus Repair

There are all sorts of events that can damage a car windshield. Some, like a poorly aimed ball from a neighborhood kid or a piece of gravel that hits the glass on a busy road, are fairly innocuous, albeit unfortunate. Others, like vandalism or a fender bender, can often be more serious and dangerous. Whatever the cause or the severity, a damaged windshield is nothing to be trifled with. When it comes to broken, chipped, or cracked automotive glass, it's important to get a professional on the job so that he or she can determine the appropriate course of action and complete a windshield replacement or repair as needed. That way, you can get back on the road with confidence as soon as possible.

Incurring damage to your windshield is unfortunate, but the good news is that a total replacement job isn't always necessary. Auto glass professionals can often perform windshield repairs, especially if the damage to your glass is small and contained. This type of repair works best for small chips or cracks to the glass. To complete the repair, an auto glass professional will clean the area so that the surface is prepped and ready, then apply an epoxy resin that will fill in the chip or crack in question. This resin creates a bond between the parts that were broken as well as filling in any gaps. When it sets and dries, though, this material is clear and smooth, and so becomes an almost invisible part of the whole glass's surface. It's extremely important to call an auto glass repair expert and get this type of repair done if you have any damage to your windshield. You need to fix even the smallest nicks as soon as possible so that they don't have a chance to expand and get worse, possibly requiring total windshield replacement.

Getting a full replacement windshield is obviously a different procedure from getting your windshield repaired. If the damage to your windshield is either too severe or is in a location where a repair won't be a viable long-term solution, your auto glass pro will wholly replace your existing glass with a new piece. This can feel like a daunting prospect, especially in terms of cost, and it might be tempting to simply live with the damage to your windshield if it's still mostly intact. However, this is a poor course of action for many reasons. First of all, a damaged windshield makes your car exponentially more vulnerable to both the elements and to vandalism and other crime. Secondly, damaged windshield glass can impede your visibility and creates risk for further damage to your car and injury to vehicle occupants if you were to get into an accident. With modern techniques and tools, replacing your windshield glass does not have to be a huge ordeal. Your local auto glass expert can remove the old glass and install the new in a very short time. Before work starts, make sure that the replacement glass is the correct type. Most reputable auto glass pros will offer OEM (Original Equipment Manufacturer) glass that will exactly match the make and model of your car. Once the replacement is complete, you'll be ready to get back on the road behind the wheel of a safe and secure vehicle.

If you have a damaged windshield, call your local auto glass professional as soon as possible so that you can get the appropriate type of work done. These experts can perform windshield replacements or repairs quickly and efficiently so that you can once again have a fully functioning vehicle.

Auto Dent Repair - An Affordable Solution

Traditional auto body repair always meant that you were going to be paying for much more than just fixing the dent. You would also pay for a lot of labor hours that are spent physically pounding out the dent as well as the cost of repainting it. Even worse, the end result often wasn't very satisfying on the eyes or the wallet.

With the growing popularity of paintless dent repair, you can receive all of benefits of traditional auto body repair without the serious drawbacks. It will take much less time, often less than hour and is much less expensive.

If you were to walk into an auto dent repair garage that specializes in paintless dent repair, you will immediately see the proof for yourself. Many of them have before and after pictures to give you an idea of what they can do for you.

Paintless auto dent repair also offers a very high success rate when compared to traditional patch jobs. It is important to choose someone who has been trained in paintless dent repair because it requires specially fabricated tools and techniques that would prove very difficult for someone who is learning-by-doing.

In fact, this process is so effective, it is often the recommended treatment by car dealers and insurance companies. However, it is important to keep in mind that paintless auto dent repair cannot fix every dent, although it fixes most.

Paintless dent repair can fix almost every size of dent, however this is not a good choice if the paint has been scratched or broken, because it will not fix the paint. It is perfect for panels that have not had any previous work and is commonly used on vehicles that have been made from 1990 to current.

It is a less expensive option that can be completed by a specialist in a fraction of the time than traditional auto body repair.

Do You Have a Broken Glass Sculpture, Vase Or Bowl?

Searching For An Experienced Glass Restoration and Repair Expert? Find The Right Restoration And Repair Service And Breathe Life Into That Broken Object.

Do you have a sculpture, bowl, stemware, or other piece of glassware that has become damaged? If so, you may be surprised to learn that you don't have to toss your glass object away. You can have it repaired, and often times for less than the cost of replacing it.

With the help of an experienced glass repair or restoration expert, it is possible to restore most pieces to their original beauty. Not only will this allow you to continue to enjoy pieces that may be important to you or hold special meaning, it can also save you money on replacement costs. You might be surprised at how much today's replacement cost might be!

Although there can be times when replacing an item is far less expensive than hiring a professional glass repair or restoration service to repair them, costs to repair prized or valuable objects are typically less than replacement costs.

Perhaps your glassware is not actually broken or chipped, but just cloudy? A restoration expert can help clear up cloudy glass that develops over time. You can enjoy crystal clear glass once again. This means your antique pieces and family heirlooms can once again be as beautiful as the day they were first purchased.

Although some repair services choose to specialize in repairing only certain types of items, many will work on virtually anything made of glass...

•Vases
•Bowls
•Stemware
•Dishes
•Sculptures
•Figurines
•Trophies
•Chandeliers

Some restoration and repair providers also service top-of-the-line name-brand glass items. In this case, original replacement parts are essential, such as stems for stemware, in order to make the necessary repairs.

Before you hire a repair and restoration provider, it is in your best interest to ensure the provider has worked with similar items previously. You want to be sure the provider has the knowledge, skills, equipment and experience necessary to repair your item so it looks as good as new. A quality repair by an experienced professional can also help ensure the resulting quality and integrity of the piece is solid and long-lasting, further validating the restoration cost.

It is possible to repair that valued glass object, often times for less than the full replacement cost. An experienced repair or restoration expert can deliver the results you are looking for.

Auto Body Shops - Few Tips For Dealing With Them

It happens to all of us at one point in time. We get into an automobile collision. Hopefully, it is not too bad and we are not seriously injured. But usually the car does not fare as well and comes away with significant damage.

What is the next step? Likely, after informing the insurance company you take your vehicle to one of their "approved" vendors.

Here is what happens next. You tell the insurance company what company you choose. By this time they have already taken phones of the car and know how extensive the damage is. They have a computer system that gives them a printed estimate stating what the replacement parts and labor will be based upon a set hourly rate.

This statement is given to the body shop. It comes with a break down of what the labor and parts "should" be and the company has to usually be able to totally fix the car for that price. Keep in mind that what is printed out represents the best case scenario and doesn't allow for items on the car that was missed or problems that come up.

Now here are some things to watch out for. Local body shops are operating under very, very thin margins and the incentive to "cut corners" is huge. Getting an extra $300 off a job can really add up over the course of the month when you are talking about doing at least 3-5 vehicles every week.

Replacement Parts

Make sure the parts being used on your car are OEM parts. These are replacement auto body parts are sent directly from the car manufacturers and are designed with the same specs as the vehicle came with. Aftermarket parts can be significantly cheaper yet are not the same quality and make not hold up the same in the event of another accident.

No Realignment

The frame is usually somewhat bent when a car goes through an accident of any kind. It needs to be properly realigned. Unfortunately, because the money made off one car can be very little the propensity to skip this step is very high. Later down the road this will cause your car to not drive straight but at a tilt and your tires will wear prematurely.

Using Bondo (Fillers) Instead of Replacing the Part

Filling any damage in with bondo is not bad in itself. If you know what they are doing, they tell you, and this is what you are paying for then it is fine. The problem comes in when you think you are getting a vehicle back that is 99.9% the same as before it was wrecked and it is not. Filling a damaged part in with filler rather than replacing the expensive part is a common tactic and you want to make sure it is not done on your vehicle. All damaged parts should be replaced unless you are paying a lower price for the car to just be fixed (in the case you want the cheapest price and do not care about having a car exactly the same as before).

Keep in mind that most auto body repair shops are honest and are surviving in a tough industry. The insurance companies nickel and dime them at every turn and they are made to give them at time ridiculous discounts to get any business. Nevertheless, corners should not be cut at your expense and being watchful is just a smart way to go.

Cracked Bumper? Fix It the Smart Way

A cracked bumper is one of the most common car body repairs carried out by smart (Small to Medium Area Repair Techniques) repair operatives. Bumpers are designed to handle low impact collisions such as being hit by a shopping trolley, low speed scraping collisions with other vehicles and car park barriers and other minor impacts. Often this kind of accident results in dents, scuffs and scrapes which can be repaired quickly and easily by a mobile car body repair technician with some car body filler, primer, paint and lacquer. Sometimes however, a crack will appear and split the bumper and this has to be dealt with differently.

If a cracked bumper is not repaired or the repair is carried out with normal filler, the structural integrity of the bumper is compromised. It is essential that the bumper crack is treated and rejoined with a hard yet flexible resin. There is a specific technique used to accomplish this which should be carried out every time.

Usually the crack does not look severe, it often has the appearance of a hairline crack and it is tempting to run a little filler over it and treat that as repaired. The result of this is that the next time the bumper is put under any pressure at all, the crack will reappear and often widen. The crack must be widened, effectively worsening the damage, initially so that there is enough of a gap for the resin to fit in. A hole is drilled at each end of the crack, half on and half off the very end. This permanently stops the crack from running again. Next, a v-shaped groove must be made right down the centre of the crack, wide enough for the drill bit to make a hole without going off the edge of the crack.

A series of holes, one on each side of the crack every inch or so along the whole length of the crack need to be drilled. A strip of mesh is then placed on the inside of the bumper all along the damage - this will hold the resin in place while it hardens and can be left there afterwards. A mix of resin and hardener, specifically formulated for bumper repairs such as this, is then injected into each of the holes that have been drilled. The mesh backing provides the purchase needed to prevent the resin going straight through. The aim here is to effectively "stitch" the repair together.

After applying the resin, a body filler spreader (or ideally specialist contouring film) is used to smooth the repair on the top side of the bumper to minimise the sanding that will be required later. Care must be taken as the bumper resin can melt if sanded too vigorously. After the resin has fully hardened the bumper is structurally sound again and can be sanded, filled, primed, painted and lacquered as normal. Result - a perfect bumper repair

The Ins and Outs of Attending an Auto Mechanic School

If you're looking to receive training as a car mechanic, the best way of learning the trade fast is by attending an auto mechanic school and signing up for the programs being offered. While landing a job at an automobile shop or getting an apprenticeship can always work, you'll most likely have to wait at the bottom of the "food chain" for you to learn more complex techniques and lessons. There's also the problem of your mentors not knowing as much as you thought they did.

While enrolling in an auto mechanic school can cost some money, you can rest assured that you're getting the best education to be successful in the trade. The United States boasts of having a multitude of mechanic schools in the country, with almost each state offering quality programs you can't go wrong with.

Whether it's a course that tackles diesel engines, automobile bodies, motorcycles, marine or aviation, most schools-especially the best ones-will offer these programs to interested individuals, helping them build their profession from scratch.

To ensure that you get quality education, reputable auto mechanic schools will have a roster of professional instructors who can teach you not just the fundamentals of automobile repair and maintenance, but also how to use the latest technology and equipment of the trade.

But like all good things, attending an auto mechanic school comes with a price. Tuition is not cheap, and even if you somehow qualify for financial aid, you'll most likely have to pay a hefty sum of money to sign up for a program. But then again, this is a worthwhile investment for a better future.

By graduating from a good auto mechanic training centre, you're putting yourself in a position where employers are more likely to consider you for employment positions they might have. And if you persevered and stayed focused on learning all you can throughout the course of the program, your chances of being a successful mechanic are even higher.

Motorcycle Pinstriping - Make Your Motorcycle Stand Out

Motorcycle pinstriping is a great way to add a creative touch to your motorcycle. These pinstripe designs can be created to follow any theme and to make you bike look amazing. Pinstriping is a series of painted designs added to you motorcycle to make it unique. Pinstriping can be applied at a body shop or may be done at your own home.

Motorcycle pinstriping has been around for many years and has continued to gain popularity among motorcycle owners. Beginning in the 1950s, the popularity of vehicle pinstriping began to grow. Later individuals began to add these creative designs to their motorcycles as well. For those who enjoy showcasing, pinstriping your motorcycle is an important part of the appearance of the motorcycle which can help the bike stand out from the crowd.

When choosing a pinstripe design for your motorcycle, it is important to think of what interests you. You may either purchase a template or stencil that has the design pre-made, or you may choose to design the pinstripe freehand. Each motorcycle pinstripe is distinct and unique designs can be seen on motorcycles around the world.

The application process of the paint may be done by using a kit or at an auto body shop. Kits are available containing stencils that give you a consistent outline for the pinstripe design. These stencils are applied onto your motorcycle by using a pinstriping brush and paint. Motorcycle pinstriping is most commonly done at an auto shop where pinstripers apply the design using freehand to give a more professional look.

Another helpful method of pinstriping is the use of a pinstriping tool. By using this tool, motorcycle pinstriping can be applied more thoroughly as this tool is sure to paint the edges of the motorcycle. Also, you can easily paint a single straight line or a set of parallel lines. Whichever method is used, pinstriping should be carefully applied to add a custom touch to your cycle.

Motorcycle pinstriping comes with many great benefits. You, as the designer, are able to decide what type of pinstripe you would like and also get to choose the colors that will appear. Pinstriping your motorcycle is a great way to customize your bike and show your style through the intricate artwork. Although pinstriping can result in amazing results, you must be sure that the application of the design is carefully applied to ensure that the artwork is neat and organized. By taking an interest in motorcycle pinstriping you will soon begin to gain an appreciation for each individual design.

Car Repair Prices: Further Evidence that 98% of ALL Repair Shops are Abusing Industry Guidelines

According the National Highway Traffic Safety Administration, it is estimated that automotive service consumers are scammed tens of billions of dollars every year. Repair shops--dealerships, local shops, and franchises--are repeatedly at the top of consumer complaint lists every year. Multiple undercover investigations have caught repair centers red-handed ripping people off. Government agencies across the nation warn against service center repair scams. Consumer advocate groups constantly provide tips and suggestions to avoid getting ripped-off. Service industry insiders continually step forward to expose service industry abuses. Study after study reveals that service centers are manipulating industry guidelines. There's a real problem! Yet, there are still skeptics.

The above comments are sweeping strikes against an industry so vital to the community. Yet even these known facts don't take into account the unknown. Ripping people off in the automotive service industry is so ingrained in the business design and culture it's considered normal. In other words, before one even begins to uncover excessive charges, this self-regulating industry hasn't just stacked the deck, it has built and entire house of cards.

The bulk of auto repair scams go unnoticed (in spite of the tens of billions already recognized scammed from service clients yearly). Few understand the service industry's pricing guidelines and accountability structures, much less its scams and tactics. Service customers have no idea if they were charged fairly or not. Most customers leave actually thanking their service representative when they should be questioning the bill!

Service centers are quick to protest, shouting, "We're honest and fair." Yet, when questioned on their billing practices they don't know, follow, or even understand established guidelines.

If they don't know the rules, then how are they playing the game? The answer is simple: they make the rules up based on loose interpretations of industry guidelines. Loose interpretations allow for a plethora of pricing abuses. Is it any wonder every state has warnings about car repair scams--including Alaska!

In the process of developing a solution to end price-gouging, RepairTrust has stated that 98% of ALL repair shops are ripping people off in one form or another. During these studies, estimations actually pointed to 100% of service centers price-gouging. However, we allowed for a margin of error and reduced this to 98%.

In light of the ever-increasing evidence of repair scams and pricing abuses, RepairTrust may reconsider the margin of error!

How to Buy Car Tires

In order to be able to buy car tires one must familiarize themselves with some basic information about tires, and how to choose the proper tires for your car. Although many tire shops can give you proper advice on tires and which will be best for you, it is still important for you yourself to know about tires, in order to save time, to go in knowing what you want, and to avoid getting lied to when you do buy the tires.

Basics of How to Buy Car Tires

One of the first things to distinguish different tires is their size, and type. The dimensions of tires are usually written on the sidewall of every automobiles tire. An example of this code will be "P225/60/16 95H M+S." One of the most important things in replacing tires is finding the correct size to buy. The tire size is indicated by the3 sets of numbers indicating its width, aspect ratio of sidewall compared to width, and diameter of the rim.

Type, Speed Rating and Load Index of Car Tires

The type of tire is indicated sometimes by either a P or LT meaning passenger (P) or a light-truck (LT) tire. The next set of alphanumeric code (e.g 95H) is the load rating and speed rating. These numbers and letters indicate the tires ability to dissipate heat at high speeds, and the load carrying capacity. The final set of number indicates the purpose of tire. For example M+S is all season tires. These basics are very important to know when buying car tires.

In order to get the best performance and fuel economy is recommended to use the manufacturers recommended tire size and dimensions. The manufacturer of your vehicle will usually have this number on a sticker in your inside panel of the driver door or the gas tank door.

Buy Car Tires Based on Treadwear

To determine the wear and tear time you should look for the tires UTQG or Uniform tire Quality Grading. This will tell you the tread wear, the temperature resistance, and traction of the tire. The UTQG rating of wear and tear is a numerical rating system and an alphabetical grading system like A to C is for temperature, and AA to C is for traction.

You Can Buy Car Tires that are Technologically Advanced

Many manufacturers have technologically advanced tires that make your driving experience more comfortable, and slightly safer, consider these when you buy car tires for more of an edge to your driving experience. One of the most popular types of technologically advanced tires is run-flat tires. Run-flat tires are designed tough to withstand punctures, and flattening out when a nail or tear affects it. These tires have a tough sidewall and it keeps it from deflecting. Some run flats have different ranges you can drive on them while flat; one of the best systems is the PAX system which can take you up to 125 miles at 55mph.

Read Reviews Before You Buy Car Tires

Before you purchase any car tires, you should look up the brand and model, including all the extra technology that it comes with and read reviews about it. Personal experience can really give you better understanding about what others think about this, and also professional reviews can sometimes be better than any of the research and studying you can do on your own.

Take Safety Precautions When Repairing Your Automobile

Every year, thousands of ordinary citizens are hurt--some seriously--because they failed to follow established safety procedures when repairing cars or light trucks. Their injuries all come under the "preventable" heading. Safety precautions include the following:

1. Always place a sturdy jack stand under the frame of a car that you have raised using a bumper jack or a scissors jack. The jacks cannot be trusted, and the vehicle may fall unexpectedly, and with no warning.

2. Once you have a jack stand in place, block the opposite (and diagonal) wheel to prevent the car from rolling. That is, if you are changing the right-front tire, place blocks (sometimes called chocks) on both sides of the left-rear tire. The blocks that I prefer are pieces of 4x4 posts, about one foot long each.

3. Use only quality tools, even on the simplest of repairs. Cheap tools will fail, crack or slip on the nut or bolt you are attempting to turn. Auto-repair shops and larger hardware stores carry tools that have a lifetime guarantee. Cheap tools lack such a guarantee. Additionally, if you are using sockets that attach to ratcheting wrenches, use 6-point sockets rather than 12-point sockets for a better grip on the nuts and bolts.

4. Don't wear jewelry of any kind when working on a motor vehicle. Set aside rings, watches, necklaces, etc., before attempting any repairs. Gold rings are especially dangerous because they conduct electricity. If your ring finger ever gets between the positive post on the battery and any other metal part on the vehicle, 400 amperes of current will flow through the ring, causing serious damage to your fingers and hand. Metal watch bands can also cause harmful short circuits.

5. Choose your work clothes carefully. Never lean over a running engine if you are wearing a necktie, for it takes just an instant for a moving belt or pulley to catch on the tie and yank you into the engine area. Also, do not wear shirts with shirttails hanging out for the same reason. Always button your cuffs if you are wearing a long-sleeve shirt.

6. If doing electrical work of any kind, always disconnect the negative battery cable from its post to prevent accidental short circuits. Additionally, if you must remove the battery for any reason, always disconnect the negative cable before you disconnect the positive cable. Reason: If you use a metal wrench on a positive cable connection (negative cable still attached), and the wrench inadvertently comes in contact with any other metal part in the engine area, you will have an immediate short circuit. You do not run that risk if you disconnect the negative cable first.

7. Wear clear protective glasses if you are using power or impact tools on a motor vehicle. That is the only way to protect your eyes from chips of metal or other foreign objects that a power drill or an impact wrench may cause.

8. Finally, think what you are doing at all times. Know what the next step must be. Remember, a motor vehicle is nothing but a big, dumb machine that is never to be trusted. If something can go wrong, it probably will go wrong. Stay safe.

The author is an ASE-certified automotive repair technician.

Automotive Spray Paint Guns

Automotive spray paint guns can be used for many different things such as painting a wall or your house, but mostly they are used in the automotive industry for car painting.

Automotive spray paint guns can cost as little as 100 dollars, but professional spray paint guns may cost more than 500 dollars, so before you buy it make sure for what kind of purposes you plan to use it. If you might want use it just once, for repainting your car, than better solution would be to go in an auto body shop and let the professionals to do the job. In that case you would spend (if you are looking for ordinary paint job) almost the same amount of money as the average cost of paint job is about from 300 to 500 dollars and you won't lose your time with painting on your own. But in the opposite case, when you plan to do multiple car paint jobs and maybe planning to become a professional amateur painter or even more, than you really should buy a spray gun as it is one of the most important tools for car painting.

For automotive painting beginners perfect gun is high volume, low pressure spray gun, called HVLP in short. It is efficient, less dangerous to your health and less dangerous for the environment in the comparison to others. Next, you will have to choose between siphon-feed and gravity-feed. Siphon-feed spray guns store their paint supply beneath the nozzle while gravity-feed spray guns do just the opposite as they store their paint supply above the nozzle. Gravity feed airbrushes have some advantages over the siphon feed airbrushes as they spray smoother, primarily because they don't rely on air pressure to get paint to the needle. They use almost all the paint, because there is never any left in the bottom of the container and in the end the design makes it easier for us to maneuver in tight places.

When you are choosing a spray gun another important step to do is to choose the tip size. Tips range from about 1.3 mm to 2.0 mm. The larger the tip, the heavier the paint it is designed for. If you are on a budget, you will probably go for a spray gun with a single tip. Then you will have to choose a thing called an air compressor. Take one that meets the requirements of your spray gun. Obviously, you will need to factor in air compressor specs when you are choosing your spray gun. Spray guns are rated by cubic feet per minute (CFM) at a given psi. Choose a gun that does not demand excessive CFM or psi, so you won't have to buy a world-class air compressor just to keep up with it.

This is the majority of things that you have to know when you are choosing a spraying technology for car painting.

Auto Repair Shops For Luxury Cars

In today's day and age, new cars are very complicated. Most everything on your luxury automobile is ran electronically, and things can get very confusing when something on your car decides to break. It is best to seek out someone who specializes in high end cars to look into what is wrong with your car, to ensure you are getting the problem fixed properly. Gone are the days of the backyard garage, or working on your car yourself. The complications of the new luxury cars of today need a certified, trained professional to properly maintain and fix them.

Having your luxury car fixed can also be very costly and some shops that don't have extensive knowledge when it comes to problems that may arise. You also really want to get your car fixed right. It would make no sense to go get your car improperly fixed, just to have it break again a month later. You should be very careful when it comes to car repair, and really research out auto repair shops to ensure they are reputable, and priced fairly. It is very easy to get ripped off from inexperienced auto repair shops, and the quality of work is just not up to par for your luxury car needs.

With all the new technology and features coming out in cars today, it is amazing that anyone knows how to fix them. People go to school and learn everything there is to know about your specific model car, and take pride in knowing that. Having a certified mechanic for your certain luxury make can make a world of difference when it comes to finding out a problem, and of course fixing the problem that is found.

Insights Into EV And Hybrid Repair

Without doubt the Toyota Prius is the most successful hybrid car at the moment, and with millions now on the road, auto body repair shops can only ignore Prius and other electric car repair at their peril. All established car manufacturers, European, American and Japanese alike, now have hybrid or electric vehicles included in their product lines. It doesn't take a master technician to realize that these vehicles have new technologies in them that auto body repair and service shops need to study in order to effect proper repair.

As befits their core technology, shops need to learn about the electrical systems of the hybrids and EVs for proper electric car repair. With electric and hybrid cars, two different electrical systems exist. One is the traditional 12-volt system which powers the lights and other electrical accessories of the car. The other is a high voltage system that has the potential of electrocuting any worker who is ignorant of how to discharge or disconnect the system in order for it to be worked on. Mechanics and auto body repair technicians need to know how to properly prepare these vehicles before beginning any work for their own safety and the safety of the work environment.

Apart from the knowledge needed about an electric vehicle's electrical system, auto body repair shops need to be also updated with regard to the steels currently being used by automobile manufacturers not only for their hybrid cars but also for the fossil-fueled counterparts. The Toyota Prius, for example, was designed with the most up-to-date crash and safety standards in mind. Using high strength steel to manufacture certain safety-critical structural features, the Prius passes offset deformable barrier tests as well as dynamic side impact tests with flying colors. Other tests it has undergone and passed include full-frontal collision, rollover and rear moving barrier. In order to pass all these tests, Toyota has designed into the Prius a high integrity passenger cell with deformable and energy-absorbing crash structures front and rear.

As with other makes and vehicles on the market, this use of high-strength and alloyed steels has, simply put, made the job of auto body repair shops harder with regard to electric car repair. But for forward-thinking managers, these new technologies represent an opportunity to gain an edge over the competition. Becoming known as a shop that is second to none in repairing vehicles with the newest technologies opens up new avenues for marketing their services.

Auto Repair Estimates and Car Repair Prices - The Real Information to Avoid Car Repair Scams

Worrying whether or not you were overcharged for your car repair is an awful feeling. There's tons of advice on how to avoid getting ripped-off, but few discuss the actual car repair prices. We really need to look at the charges on a car repair estimate or auto repair invoice to determine if we're paying too much.

The focus needs to shift from giving outdated and ineffective advice to addressing the specific charges. Are they legitimate charges? Can they be justified by industry guidelines?

Now car repair estimates can be confusing. So let's break it down to get a better idea if your auto repair shop is billing you appropriately.

First, a glossary of terms is in order, as the auto industry has a language of its own...

Aftermarket Parts: parts not made by or for the manufacturer.

MSRP: Manufacturer's Suggested Retail Price

OEM: Original Equipment Manufacturer. Manufacturer approved parts designed specifically for your vehicle.

TSBs: Technical Service Bulletins. Notes and instructions provided by the manufacturer for known and specific concerns (they are not recalls).

Flat Fees: services such as alignments that don't get broken down into parts, tax, labor

Miscellaneous Charges: these can include, but are not limited to shop supplies - rags, chemicals, hazardous waste disposal fees, waste oil ...etc.

Labor Rate: a repair center's hourly charge to service your vehicle

Labor Time: the amount of time or hours determined that it will take to fix your vehicle

Labor Description: the step-by-step written details of repairs and/or services

Ok, let's look at the Anatomy of an Auto Repair Estimate:

There are six basic components to a car repair estimate

1) Customer/Vehicle Information

2) Parts

3) Labor

4) Miscellaneous Charges

5) Flat Fees

6) Summary of Charges

Customer and Vehicle Information
Using a generic "top down" style estimate, the top portion simply contains your personal information and your vehicle's specifics: year, make, model, mileage...etc, as well as your request or concern.

We also want find the shop's labor rate. The labor rate is critical in determining if you paid too much. Most repair centers don't list the labor rate. We'll discuss why shortly.

Auto Parts
Parts are listed usually with a brief description, as well as the quantity, and the price. There are three types of parts: OEM (parts made by or for a manufacturer). These are the parts installed by a dealer, although many local shops use OEM parts too.

Aftermarket parts are non OEM parts, and there are various degrees of quality, depending on the brand and where they're made - China versus USA, for example.

Then there are Used parts purchased from a salvage yard.

To determine if you paid too much for parts, first find out what type of parts are being used. With OEM parts, you don't want to pay more than MSRP, although most people do without realizing it. Premium aftermarket parts are similarly priced across brands, although beware not to pay more than MSRP, which again, many folks do. Used parts prices are all over the place, so pick the price in the middle.

Auto Repair Labor

Labor is billed in tenths. So 1.0 equals 1 hour. 1.5 equals an hour and a half.
Labor rates range from $60 to $100 per hour at local repair shops and $80 to $140 per hour at the dealer level. Labor times are based off established industry guidelines, which are frequently abused.

If you don't see the shop's labor rate posted on the car repair invoice, ask your service center for the rate. Repair shops can manipulate the labor rate (among other things) with a labor matrix. Matrix pricing is a complicated and ethically questionable practice discussed at length in RepairTrust literature. What you need to know is that you can pay as high as $150 per hour rather than the posted labor rate of $105 per hour.

Thus, you'll want to multiply the number of hours billed (which is also often not posted) by the shop's labor rate to determine if you've been charged accordingly.

Most labor descriptions are poorly written and difficult to understand. So ask questions.

Here's a "clear" labor description for a 30,000 mile service on a Toyota Camry.

Performed 30,000 mile service per customer request, and in accordance with manufacturer guidelines. Changed oil and filter, installed new air filter, cabin filter and performed all necessary tests, checks, and procedures, including road test (miles 30,123 - 30,125). Performed lubrication services and confirmed proper vehicle operation. Set tire pressures, and checked fluids, belts and hoses. Note: vehicle is pulling slightly left. Needs alignment

Miscellaneous Charges

The bulk of your car repair invoice will be parts and labor, but we can't forget about Miscellaneous Charges. These charges can include, but are not limited to, shop supplies - rags, chemicals, hazardous waste, disposal fees, waste oil ...etc. The latter of these may be billed out separately in a summary at the bottom of your repair invoice.

Very few of these "extras" are actually used during regular repairs. Miscellaneous charges are calculated off the amount of labor hours billed, not the amount of miscellaneous items used.

Flat Fees

Flat fees can be another very tricky area. Flat fees are services, such as an alignment, which don't get broken down into parts, tax and labor. This makes it difficult to determine the real and fair price. On the plus side, most flat fees are competitively priced.

Be warned however, another term for Flat Fee is called Menu Selling. In other words, you might see Tune Up: $99.99 or Transmission Flush: $89.99. Follow your manufacturer's recommendations only, not a dealer's or repair shop's menu.

For an interesting read on this topic, click
car maintenance costs

Summary of Charges

The last part of an auto repair estimate is the summary of charges. It's usually found in the bottom right hand corner of the invoice. Check it against the charges above to ensure that it all adds up mathematically, as well as logically.

This basic estimate outline may differ from your particular invoice, which may have other categories such as "Sublet" or "HazMat."

A sublet charge is added when your auto repair shop uses another vender to fix or repair your car, such as a glass company that replaces your windshield.

A HazMat charge may include waste oil or other disposal fees. Just make sure that the charges are warranted, as again, they too are often calculated off the labor time rather than actual need.

In sum, understanding the "actual" charges, asking the right questions, and breaking down your auto repair costs is the best way to avoid paying excessive car repair prices.

Auto Body Repair: Services To Improve Your Vehicle Performance

Auto repair service is something that you cannot avoid if you are a vehicle owner. The need for these services comes along with the vehicle, which you cannot run away from at any cost. Over the time, vehicles start facing problems in running or face any damage, which is something you need to take care of, if you expect smooth performance from your vehicle on the road. Your vehicle can be a part of any road accident that can leave cracks, bumps and scratches on the body of your vehicle and make its condition worse than ever before. It is something that no one can predict. Your vehicle can have a minor damages that only affect its looks or a major damages that can affect its overall body and structure.

When struck in any such condition, it is very important to take your vehicle to a reliable auto body repair center located nearby your place and avail custom auto body repair services. This way, you can keep alive the looks and integrity of your vehicle. Remember that having your own car is yet considered as a status symbol in society. If you are a vehicle owner, then understanding the importance of auto body repair services and how it can help in improving your vehicle overall performance and looks is something you must learn. Giving your automobile a regular repair service can no doubt help in enhancing its performance and also increases its long serving life.

You can save your hard earn money and valuable time by offering a fast and quality auto body repair services for your vehicle. Such service provider holds expertise in their respective domain and drive hard to give the best auto repair services for your automobile. They make sure to return your automobile in safe and smooth running condition by replacing all the damaged parts with the new one. Your's and your vehicle safety is their prime concern. Keeping their concern in the forefront, they ensure reliability of your automobile through their excellent auto body and parts repair services.

There are several reasons that can cause damage to your vehicle's body. Road accidents are the most common reasons that can affect your automobile integrity as well as looks. So, you need to be careful while driving on the road and keep taking your vehicle to a dependable auto body repair center on a regular interval to ensure its fast speed and smooth performance. Give your vehicle the best auto repair services that include body painting, dent repairing, towing scheduling, restoring original looks and many others. In addition, it also includes some advance services like frame repair, body repair, hail damage repairs, bumper repair, etc. All these services can give new life to your vehicle for sure.